8 x 8 EXTENDED L-BAND FAN OUT MATRIX

FOM8x8

1U RACK WITH LAN CONTROL, 700 – 2450 MHz

ROVER SATCOM - FOM8x8
  • RF FREQUENCY 700-2450 MHz
  • RF POWER MONITORING
  • AGC/MGC GAIN CONTROL
  • HOT SWAP REDUNDANT PSU 1:1
  • FULL LNB POWERING (opt.)
  • CONFIGURABLE VIA LOCAL DISPLAY & KEYBOARD
  • MONOTORING & CONTROL VIA WEB GUI & SNMP
  • The FOM 8 x 8 is a FAN OUT MATRIX for L-BAND signals. It is available in two versions, “Complete” or “Lite”.
  • The Complete version can include the Input/Output signals control modules that allow the automatic or manual gain configuration, furthermore it has the possibility to archiviate the LNB Power Supply on the 8 Inputs.
  • The double redundant PSU intelligent technology allows an immediate switch on the secondary power source.
  • This technology ensures continuous quality of service and the hot swap Modules can be easily replaced by the local personal.
  • An advanced monitoring system provides all measurements and alarms locally or remotely via WEB or SNMP.
  • Ideal for Professional use, like Redundancy, Distribution & Monitoring, these are currently the best value for money

RF PORT CAPACITY:

  • Input Port Number: 8
  • Output Port Number: 8
  • Optical Input port Number: up to 8 with MINI-ORX (SC-APC, LC-APC, E2000, FC-APC opt.)

RF SPECIFICATIONS:

  • Frequency Range = 700-2450 MHz
  • Connectors = F (or BNC or SMA opt.)
  • Impedance = 75 Ohm (or 50 Ohm opt.)
  • Max INPUT Level = 0 dBm typ. +5 max. (with 10 dB attenuator ON)
  • OP1dB = +17 dBm direct (+3 dBm with 4 way splitter)
  • Damage Input Level = 15 dBm
  • Input R.L. = >16 dB, 14 dB min.
  • Output R.L. = >16 dB, 14 dB min.
  • Total Gain/Loss = 0 dB, ± 1,5 dB typ, 2 dB max
  • Temperature gain variation = 1,5 dB from -30° to +60° C
  • L Band Flatness = ± 1 dB, 1,5 dB max
  • Full Band Flatness = ± 1,5 dB, 2 dB max
  • Flatness in 36 Mhz interval = ± 0,3 dB, 0,5 dB max
  • Isolation between adjacent out Port = > 24 dB, 22 min.
  • IMD = > – 40 dB (2 Tones at -13 dBm)
  • Noise Figure = 9 dB

LNB POWER CONTROL :

  • D.C. VOLTAGE = OFF, 13V, 18V (or 24 optional) max 600 mA for each Input
  • TONE = 22 KHz ON/OFF
  • LNB Protections = short circuit and current limited

RF POWER SENSING:

  • POWER THRESHOLD = – 45 dBm (RMS)

DRY CONTACT ALARM BOARD:

  • CONNECTOR = SUB-D9 Male
  • CONTACT LOAD = 65 V – 400 mA
  • A & B MAINS PSU = one defective or both
  • LNB = dc Short Circuit
  • RF POWER SENSING = RF TOO LOW or NO RF Signal

REDUNDANT POWER SUPPLY:

  • N. 2 AC MAINS PSU = 110-240 VAC (with 2 separate receptacle for 2 separate Power LINE)
  • AC POWER CONSUMPTION = < 25 VA
  • N. 1 EXT DC PSU = 48 V D.C. (optional)

GENERAL SPECIFICATIONS:

  • SLIM CASE = 19” 1U Rack (43 cm deep)
  • NET WEIGHT = from 3 to 5 Kg related to the IN/OUT modules
  • SAFETY = EN 50 083-1 and EN 60 950.
  • ENVIRONMENT:
    – Temperature range: –30° / + 55° (max 60°)
    – Umidity 95%
  • EMC = EN 50 083-2

ROVER SATCOM - FAN-OUT 8 x 8 L-BAND SAT MATRIX ROUTER - FOM-8X8 Physical & Connections V1

ROVER SATCOM - Equipment Index V8_5-01

Download