RSP 30-8

N.4 or 8 full satellite wide band
input polarities 250-2.350 MHz
N.1 satellite band output 950-2.150 MHz
with 30 selected transponders

ROVER RSP 30-8
  • New Wide Band Sat Input from 250 to 2350
  • Up to 8 Wide Band Satellite Inputs
  • N.1 Repackaged Output with 30 Sat Transponders
  • Superb Phase Noise for DVB-S/S2/S2X
  • High selectivity frequency Conversion
  • High sensitivity and Automatic Gain Control
  • High SAT RF out with AGC, Level & Slope Control
  • Built-in 1550 nm Optical Transmitter
  • SC/APC shuttered Optical Connector
  • USB port for easy Transponder Configuration
  • Built-in AC power supply
  • Very thin design only 1 unit 19” Rack

ROVER RSP 30-4_8-2

RF SAT

  • SATELLITE INPUT FREQ. RANGE: From 250 to 2.350 MHz, for New Wide Band LNB
  • SATELLITE OUTPUT FREQ. RANGE: Form 950 to 2.150 MHz for Standard Satellite Band
  • FULL SATELLITE INPUT N. : N. 4 or 8 (opt.) Full Satellite Wide Band (4 Input Each Block)
  • TRANSPONDERS OUTPUT N. : From 24 to 32 depending on the transponder Bandwidth
  • TRANSPONDERS B. W. : Selectable from 30 to 80 MHz Bandwidth
  • SATELLITE INPUT LEVEL: Min. 55 dBμV (-52 dBm), Max 85 dBμV (-22 dBm), with AGC Control
  • SATELLITE OUTPUT LEVEL: Adjust. each transp. 1 dB step, from 81 dBμV (-26 dBm) to 116 dBμV (+9 dBm), -35 dB IMD
  • LNB DRIVE VOLTAGE & PULSE: 13 V, 18 V, 22 KHz, selectable for each Input (max 600 mA for each Block)
  • SATELLITE IN/OUT INPEDANCE: 75 Ω “F” Female Connector
  • SATELLITE IN/OUT RETURN LOSS: 12 dB typ. (10 min.)
  • SATELLITE BAND SLOPE CONTROL: from 0 to 8 dB, 1 dB step.
  • TRANSPONDER BAND INVERTION: Normal or (reverse for “C” Band opt.)
  • SINGLE TRANSPONDER FLATNESS: 0,25 dB at 40 MHz B.W., 0,5 dB at 80 MHz B.W.

OPTICAL S. M. (optional)

  • BUILT-IN OPTICAL TRANSMITTER: up to 10 Km Fiber Optic Drive
  • OPTICAL SIGNAL WAVELENGHT: 1550 nm (1310 opt.)
  • OPTICAL OUTPUT POWER: 0 dBm (1 mW)
  • OPTICAL RETURN LOSS: 50 dB
  • OPTICAL CONNECTOR: SC/APC 8° shuttered
  • OPTICAL RECEIVER (opt.): High sensitivity, with Optical AGC, Very compact, 12 Vdc PSU, 90 dBμV SAT output.

PERIPHERALS

USB: 1 port for each Block, for easy Input/Transponder Selections and SW up-grade, directly through PC.

GENERAL

  • POWER SUPPLY: 230 V AC
  • POWER CONSUMPTION: 5 W (RSP-30-4), 10 W (RSP-30-8)
  • ENCLOSER: 1 unit 19” rack
  • WEIGHT: 3 to 4 Kg
  • OPERATION TEMPERATURE: – 15 + 50 ° (umidity 90%)
  • STORAGE TEMPERATURE: – 25 + 70 °

HOW THE “RSP 30” WORKS (Rover Sat Processor 30 Transponders)

You can select just the requested Transponder frequency (up to N.30 Transponders with 40 MHz bandwidth each), from 4 or 8 Full Extended Satellite Inputs and convert and stack the 30 Transponders into a single Satellite Band.

The frequency range of each Satellite Input can be:

  • the Standard single satellite band from 950 to 2150 MHz
  • or the NEW EXTENDED SAT BAND from 250 to 2350 MHz that can include full Vertical or full Horizontal Polarity (practically N.1 Band with 60 transponders each instead of the usual N.4 bands with 30 transponders each Satellite).

Thanks to the high selectivity and extremely Low Phase Noise, you can select and repackage the desired Sat Transponders in one Standard Satellite band from 950 to 2150 MHz without introducing any interference.

The new repackaged SAT band can have 2 possible Outputs:

  • HIGH LEVEL SAT RF Output from 950 to 2150 MHz that can drive up to 100 m of coaxial cable with AGC and Slope Control.
  • Optical Output at 1550 nm that can drive up to 10 km of optical fiber.

ROVER RSP 30-4_8-3

ROVER RSP 30-4_8-4

Download