The new frontier: Wide band LNB 230–2.340 MHz


The dSCR WIDE BAND Analyzer

  • WIDE BAND 230 – 2.340 MHz with dSCR (dCSS), SCR & DiSEqC
  • Drives standard & wideband LNBs
  • Orbit position & programme listing & data
  • MPEG 2-4 with SD-HD picture
  • Spectrum with MAX HOLD for precise dish alignment
  • Full Logging capabilities
  • SAT EXPERT: the fastest SAT identification APP
  • PC Interface for free updates
  • WiFi Network test (optional)
  • Free basic SW upgradeable on-line

Visita WWW.ROVERSHOP.IT per consultare gli accessori disponibili.

Nota *: Tutte le caratteristiche tecniche possono subire variazioni e senza preavviso. Alcune opzioni vanno richieste al momento dell’ordine dello strumento.

DVB-S/S2 (Demodulation):

  • Frequency band: 230–2340 MHz for standard and wide band LNBs
  • Interchangeable input connector: “F type”
  • Power supply at RF input: OFF, +13, +18 V, 22 kHz (0.3 A), DiSEqC, dSCR/SCR, WIDE-BAND LNB
  • Digital power measurement dynamic range at RF input: from 30 to 115 typ. dBuV
  • Noise Margin Measurements
  • DVB-S/S2 symbol rate setting: 2–45 MS/s, in 1 kS/s steps
  • Measurement parameters: – bBER up to 2×10–6 (before Viterbi) – aBER up to 2×10–8 (after Viterbi) – MER 2-25 dB resolution 0.1 dB – PER 10-2 to 10-7 (DVB S2) – BCH 10-2 to 10-8 (DVB S2) – LDCP 10-2 to 10-8 (DVB S2)
  • FEC: DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8; DVB-S2: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
  • Automatic quality test: FAIL, MARGINAL and PASS
  • Noise margin measurements: from –1 to 12 dB with built in FEC compensation
  • NET. ID.: shows bouquet and transponder names, the encryption system, orbital position and date


  • 4,3” color TFT: 16:9 high resolution monitor with auto-off timer: after 5 or 10 min without use
  • MPEG2 & MPEG4 SD & HD
  • Audio decoding: AC3 – EC3 (Dolby Digital – Dolby Digital Plus) opt.; AAC – HEAAC opt.


  • Frequency band: 230–2340 MHz
  • Span: 50–100–200–500–FULL – WIDEBAND-LOW BAND-HIGH BAND
  • dB/div: 5
  • Display dynamic range: >30 dB
  • Marker measurement resolution: 0.1 dB
  • Measurement filter bandwidth: 5 MHz at –3 dB
  • Reference level: from 30 to 120 dBμV, from –60 dBmV to +60 dBmV
  • Reference level settings: automatic and manual adjustable
  • MAX HOLD (peak hold)


  • SMART PC interface program for software (FW-firmware) and MEM plan editing is available free of charge on rover instruments web site
  • SOFTWARE (FW): upgrades are available free of charge. Check periodically rover instruments web site
  • MEM: satellite transponder list file (mem plan) upgrades are available free of charge. Check periodically rover instruments web site


  • 99 available memory plans & datalogger function


  • External power supply: 12 VDC – 1A
  • Battery: Lo-Po 7,2 V – 4,3 Ah
  • Built in rechargeable batteries with option for field serviceable module for battery replacement
  • Li battery technology where user serviceable module supported instrument to be supplied with two battery modules as standard
  • Battery duration at 25°C: – 3 hours in satellite alignment mode – >4 hours in Wi-Fi mode where supported
  • Low Battery indicator: with acoustic signaling and visual indication on graphic display
  • Automatic power management features – Back panel illumination has user adjustable time out – Indication of battery status charge
  • Battery re-charge time: 1 hour for approx. 50% capacity, <6 hours for full charge
  • On-board battery recondition cycle and condition reporting (battery test)
  • Meter power off automatically after 5, 10 minutes user selectable, option for user selectable always on


  • Sise: H 8,0 x W 22,5 x D 21,5 cm
  • Weight: 1.3 kg with batteries, bag and accessories
  • Housing: ABS plastic housing rain, dust & shockproof

WI-FI (optional):

  • WI-FI network testing: 2.4 GHz and 5 GHz


  • Carrying protective bag with side pocket bag and shoulder strap
  • TRASF-12V-1A0-G-UK: AC/DC adapter: 100V-240V/12 VDC – 1A
  • CNN-F-0153: interchangeable F – F double female input connector

NOTA: Tutte le caratteristiche tecniche possono subire variazioni e senza preavviso. Alcune opzioni vanno richieste al momento dell’ordine dello strumento.

 MASTER SAT Evo measures MASTER SAT Evo picture
Main measurements and live picture Navigate to the picture to zoom,
enter to return to measurements
MASTER SAT Evo DVBS2 constellation MASTER SAT Evo max hold sat spectrum
8PSK Constellation Fast spectrum with peak memory “MAX H”
for perfect dish alignment

Nota *: I MENU (scritte e grafica) delle figure rappresentate, possono variare senza preavviso da modello a modello in base alla versione SW installata.

  • Al momento non disponibile.

APP SW and HW optional *:

  • Wi-Fi
  • HD dolby

List of supplied accessories *:

  • Easy bag (BAG-0240-N)
  • Universal side pocket for accessories (BAGS-01-ROVER)
  • Shoulder strap
  • Battery charger power supply 12 VDC – 1A (TRASF-12V-1A0-G-EU)
  • User’s manual (CD) (UG-INSTRUM-CD)
  • Female F – female F adapter (CNN-F-0153)
  • Fast male F – female F adapter (TRA-FFEM-FMAS-1)

Optional accessories list *:

  • Currently not available

Note *: Options and accessories list, may change without notice and depend on the configuration of the instrument.
Nota *: L’elenco delle opzioni e degli accessori, può subire variazioni senza preavviso e dipende dalla configurazione dello strumento.