TAB 5 ULTRA

SPECIAL FUNCTIONS

• Exclusive patented ROVER AUTODISCOVERY system: auto-matically detects and selects analog and digital COFDM/QAM TV signals in both measurement and spectrum mode.
• Automatically identifies all the signals with digital modulation SAT, TV and CATV.
• Automatic Assistant: Signal Quality analysis, Channel Scan memorization.
• Barscan TV & CATV function from 10 to 100 channels on one screen.
• Buzzer & Noise Margin real time graph for digital signals microinterruptions.
• Reflectometric measurements APP.
• Optical Input (opt.).
• WI-FI analyzer (opt.).
• HEVC H265 decoder (opt.).
• SATELITE: DiSEqC, SCR, dCSS & Motorized antenna commands, SAT FINDER & SAT EXPERT.
• Custom Channel Plans: 25 (199 ch. per plan), Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard.
• Loggers: TV, SAT & combined with stop & go function.
• SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.
• Free S.M.A.R.T. PC interface program and FW upgrades.
• OPTIONS*: Check the Cross reference.

SPECIFICATIONS: MEASUREMENTS, SPECTRUM ANALYSIS & PICTURES

• Frequency Range: TV, CATV & Radio: 30-1.000 MHz; SAT: 700–2.700 MHz.
• Frequency Resolution: TV & CATV 25 KHz; SAT: 5 MHz.
• Power range Meas.: TV 35 to 115 dBμV, SAT 5 to 105 dBμV.
• Digital Meas: Digital Power, MER (36 to 40 dB max depending on modulation), BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER.
• Measurement Resolution: 0.1 dB.
• Level Measurement Accuracy: 1 dB typ. (2 dB max.)
• Resolution Filter Bandwidth: TV & CATV: 100 KHz @ -3 dB; SAT: 5 MHz @ -3 dB.
• Constellation: for TV/CATV and SAT signals.
• Spectrum: Fast spectrum, Max Hold and spectrum memorization with real time compare function.
• Net-id on board: Net-id, NID, TSID, LCN, SAT Orbit Position.
• Echoes, Pre-echoes, Micro-echoes: Representation in real Time.
• Quality: Digital Auto quality Test: PASS-MARGINAL-FAIL.
• Digital Pictures: MPEG2-4 SD & HD, HEVC (opt.) pictures with Program List, Audio Video PIDs, LCN, Video bit Rate all on one screen.

OPTICAL MEASUREMENTS

• SC input connector.
• Automatic loss calculation.
• Wavelengths (nm): 1310, 1490 & 1550.
• Range: -25 to +6 dBm.
• Resolution: 0.1 dB.
• Accuracy: +/- 0.5 dB.
• Optical to RF conversion.

COMM. PORTS AND OUTPUTS

• RF Input : 75 ohm (interchangeable “F”).
• USB 2.0: Type B (PC Interface).
• Audio: AAC supplied, DOLBY (opt.).
• Video: Composite Video input.

GENERAL SPECIFICATIONS

• 5” TFT TOUCH display: 16:9 high resolution and high brightness.
• Power Supply: Built in LiPo battery with 2 to 4 hours duration (depending on the function) & Battery Test function.
• DC voltage at RF input: 5 – 12 – 18 – 24 VDC, DiSEqC, SCR & dCSS commands.
• PC Interface: USB-B.
• Front-Panel: Alpha numeric keypad.
• Power Save: TFT backlight timer, brightness adj.
• PC Management: S.M.A.R.T. software.
• Weight: only 1,4 Kg with batteries.
• Size: H 13,0 x W 25,5 x D 4 cm.
• Housing: Aluminium and Steel and padded bag.

OPTIONS

• Optic Ingress
• Decoding HEVC H265 images
• WI-FI analyzer
• Dolby Audio AC3 DD+
• Elite bag with extra padding

Visit WWW.ROVERSHOP.IT to check the available accessories.

NOTE:

• All technical features can change without notice;
• Some options (APP) must be requested when ordering the instrument;
• The screens and the texts of the relative MENU, can change without notice from model to model and according to the SW version installed.