DUAL BAND PLL-BLOCK DOWN CONVERTER

BDC2-x-x

Ku-Band In: 10,70 – 12,75 GHz
Dual L-Band Out: 0,95-1,95 GHz/1,1-2,1 GHz

ROVER SATCOM - BDC2-x-x1
  • Simultaneously High & Low Ku-Band
  • Internal or ext. 10 MHz REF
  • Very low phase noise
  • High P1 dB and IP3
  • Large operating temper. range
  • For outdoor and indoor use
  • Adjust. L.O., 9,75 to 10,75 GHz
  • Adjust. GAIN, 5 to 35 dB
  • Remote control & monitor alarms
  • Coax SMA In-Out connectors
  • Low profile for 1U rack mount
  • Dual redundant configuration available
  • The BDC2-X is a LOW PHASE NOISE DUAL BAND PLL BLOCK DOWN CONVERTER.
  • It allow to cover simultaneously the full Ku-Band Frequency range thanks to the two LOW and HIGH outputs.
  • Designed for Indoor and Outdoor applications, it work in a wide temperature range and can be also mounted in a 1 Unit rack for customized built-in aplications.
  • Ideal for Professional Use with high P1 dB and IP3 is the best price/performance solution in the market.

ROVER SATCOM - BDC2-x-x - Block diagram

ROVER SATCOM - BDC2-x-x - Physical & Connections

  • Input Frequency: Low Band 10,70-11,70 GHz, High Band 11,70 – 12,75 GHz
  • L.O. Frequency: Low Band 9,75 GHz, High Band 10,60 GHz (opt. L.B.10 GHz, H.B. 10,75 GHz)
  • Output Frequency: Low Band 950-1950 MHz, High Band 1100-2150 MHz
  • Noise Figure: 12 dB max at 10 dB gain
  • LO stability, internal REF: 10 KHz -20 to 70° C, 15 KHz -40° to +80°C
  • Phase Noise (SSB): – 82 dBc/Hz at 1 KHz – 86 dBc/Hz at 10 KHz – 97 dBc/Hz at 100 KHz
  • Gain: 10 to 30 dB in 1 dB step adj. on request from 10 to 30 dB
  • Gain Flatness: ± 2 dB (0,2 dB in 65 MHz)
  • Maximum Input Power: -15 dBm RMS (at 10 dB gain, 64 Transponders cumulated power from 12 GHz LNA)
  • Maximum allowed Input PWR: no demage 0 dBm
  • P1dB Output Power: 15 dBm
  • IP3 Output: + 25 dBm
  • Input RETURN LOSS: 10 dB typ.
  • Output RETURN LOSS: 18 dB typ.
  • Spurious signals: Low Band -60 dBm typ. at 1700 MHz, High Band -70 dBm typ. at 1700 MHz
  • Image rejection: > 40 dB
  • L.O. leakage at Input: – 60 dBm
  • PSU Voltage: +12 V to +24 V DC (via Out RF connectors, or via feed through PIN)
  • Current Consumption: 650 mA at 12 Vdc
  • Input Connector: SMA 50 OHM
  • Output Connector: 2 x SMA 50 OHM
  • EXT REF: 10 MHz (automatic switch, throigh both out) -5 to +5 dBm
  • Dimensions (L x W x H): 150 mm x 75 mm x 25 mm
  • Weight: 590 gr
  • For LO lock detect, L.O. freq. selection, temperature, current alarm, gain, ext. 10 MHz lock
  • Service interface internal connector: micro USB type B
  • Operating temperature: – 40 to + 80 C°
  • IP grade: IP65
  • Available L.O. Options:
  • BDC2-S: Local Oscillator: Low Band 9,75 GHz, High Band 10,60 GHz
  • BDC2-U: Local Oscillator: Low Band 10 GHz, High Band 10,75 GHz

ROVER SATCOM - BDC2-x-x - Code & Options

Download